江门市云顶电玩城精密机械有限公司-专业生产金属密封配件

卡套式管接头结构与工作原理-江门云顶电玩城精密机械经验分享

[导读]:同时卡套在内刃口嵌入管子的外壁,在外壁上压出一个环形的闭口缘边,从而起到可靠的密封作用,卡套中部稍有拱形凸起,具有一定弹性,有利于密封和防止螺母松动,卡套尾部也···

卡套式管接头主要包括三部分:

(1)具有24°锥孔的接头体。  

(2)带有尖锐内刃的卡套。   

(3)起压紧作用的螺母。

The bayonet type pipe joint mainly consists of three parts:

(1) with 24 ° taper hole of the connector body.

(2) clip sleeve with sharp inner edge.

(3) nut for compression.

10.jpg

旋紧螺母时,卡套在压力下被推进24°锥孔。并随之下而变形,使卡套与接头体内锥面形成球面接触密封。同时卡套在内刃口嵌入管子的外壁,在外壁上压出一个环形的闭口缘边,从而起到可靠的密封作用,卡套中部稍有拱形凸起,具有一定弹性,有利于密封和防止螺母松动,卡套尾部也径向收缩而抱住管子。

Tighten nut, card sets into 24 ° taper hole under pressure. And then it is deformed to form a spherical contact seal between the clamping sleeve and the taper surface of the joint body. At the same time, the inner edge of the bayonet is embedded into the outer wall of the pipe, and an annular closed edge is pressed out on the outer wall, so as to play a reliable sealing role. The middle part of the bayonet is slightly arched and raised, with certain elasticity, which is conducive to sealing and preventing the nut from loosening, and the tail of the bayonet is also radially shrunk to hold the pipe.

44.jpg

文章出自江门云顶电玩城 转载请标明出处

VCR接头订购联系:秦先生 17688183787


  • 首页
  • 新闻
  • 案例
  • 电话咨询